Keepac food packaging machine goes through professional design. It is created by experts who have vast knowledge and experience in the following standards: IP Protection, UL, CE, environment and explosive Std, CSA, FM, etc. 2.
The product features strong resistance to corrosion. Non-corrosive materials have been used in its structure to enhance its capacity to withstand rust or acidity liquid. 3.
People will find it has a very long lifespan. Neither it is easy to get rust or get corrosion even it is used in a humid environment.
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|MDP-S||100mm ~ 300 mm||100mm ~ 300 mm|
|MDP-L||130mm ~ 300 mm||130mm ~ 420 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Application;
Interlock & Safety Relay;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
Since its inception, KEEPACKAGING CO., LTD. has rapidly developed into an export-oriented trading company. 2.
KEEPACKAGING CO., LTD. always adheres to independent innovation on food packaging machine . 3.
Aiming to be the top brand in product packaging machine realm, KEEPACKAGING CO., LTD. take potato packing machine as its tenet. Inquire! Our factory insists on winning the mini doypack machine market with high quality and impresses customers. Inquire! Anytime necessary, KEEPACKAGING CO., LTD. will be available to provide service online for customers. Inquire!
1.Manules / Videos of machine installation, adjusting, setting, maintenance are available for you.
2. If any problems happend and you can not find out the solutions, Telecom or Online face to face communication available 24 hours.
3. Coretamp engineers & technician are available send to your countries for services if you agree pay the expenditure.
4. The machine will have one year warranty. During the warranty year if any of the parts broken not by man-made. We will free charge to replace the new one to you. The warranty will begin after the machine send out we received the B/L.
5. Coretamp has an independent team for after-sale service. Any emergency please call the saleman or our after-sale's manager.
Main Performance And Structure Feature:
- Stable and operating smoothly,
- The frequency converter is used,the bags were set a long,slow and hesitant,
- Imports of electrical control system,lcd display,parameter set is simple,
- Superscript highly sensitive photoelectric eye tracking the exact location so that more precise closure,
- Temperature controlled by an independent P1D better packaging matericals for various films,
- Large rotating disk with automatic ,air package rates the best results.
Rectangular,square,round,oval round candy combined in one special-shaped finishing automatic packaging machine.
Photo of Sample Product Package:
|Packing speed:||up to 800bag/min|
1.Date coding printer, 2.Air-filling device, 3.Punching device