Home  > PRODUCT  > Servo Mini Linear Machine  >  Servo Mini Model + KAF350 Auger Filler for packaging
Servo Mini Model + KAF350 Auger Filler for packaging

Servo Mini Model + KAF350 Auger Filler for packaging

Brand Name
Place of Origin
Start Port
OEM/ODM Availability
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch;
Max Speed
20 BPM with 1s Discharge Filling time;
220V/50HZ Single Phase 5 Amps
6Kg/cm2, 0.14CBM per min;
Get Latest Price
Get the latest price
Quantity Needed:

Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.

Working Range:

ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Mitsubishi PLC


Pneumatics component Airtac from Taiwan;
Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
No bag No dump;
Easy Adjustable;
Low Operating & Maintenance cost;
Multi Bag Format;
InterLock, CE Certificate;

* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;

Product introduction

1.Safety Protection


IP66 Application;
Easy Operation, No Key inserted;

Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;

2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

3.Grippers Holding Position Function

Catch the pouch mouth where is sealed area on the pouch as the picture shows “H” The Grippers would be held the bag for filling and straight it up after filling by same pouch position. So The product would be filled more than normal pouch machine because of grippers’ working position.


Pouch Auto Feeder
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one; It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control

Convexity Product Settle

* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.

Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Zipper closing device
* Close Zipper After Filling, Before Sealing;
* The Filled bag is passed the Rolled Wheel to close the zipper;

KAF 350 Auger Filler

* Dosing Technique: By auger
* Filling Range:≤1kg
* Accuracy:±0.3-1%(depend on product property and filling weight)
* Speed:≤15bags/min
* Hopper Size:30L
* Motor: single-phase 220V, 50Hz/60Hz
* Servo Motor:1000W
* Agitating Motor: 200W
* Material:SUS304
* Level Sensor: Tuning Fork;
* No Cleaning Dead Point; High hygiene application;

Weight Checker

* Weight Checker and Feedback Control System
It is helpful for the operator to set the right weight when the powder weight is required;

Dusty Collector

* Max Blowing: 84m3/h
* Power: 400W
* Voltage: Single-phase 220 50Hz;

Screw conveyor

* Capacity: 6-8m3/h;
* Discharge Height: 2300mm;
* Hopper Size: 230L(round);
* Voltage: three-phase 220V 50Hz / 60Hz;
* Feeding Motor’s Power:3000W;
* Vibrating Motor’s Power: 120W;
* Material: SUS304;
* Tooless to take down the Conveyor to do the Clean;
* Machine Weight: 320Kg;
Safety Net
* Spec: Φ5X60X60;
* Material:SUS 304;
* with safety alarm (in the hopper);
Stainless Steel Lid;
* Spec: Φ1000;
* Material:SUS304, thickness: 1.5mm;
* with glass window on the top;

Half Opening Screw Tube
* Quick Release for Half Opening Tube;
* Tooless to take down;

Favorable rate
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
Related Products
Chat Online 编辑模式下无法使用
Chat Online inputting...