Standard: Stainless Steel 304 Frame
Model | Bag Width | Bag Length | |
MDP-S | 100mm ~ 300 mm | 100mm ~ 300 mm | |
Electronic: | Mitsubishi PLC; | Pneumatic: | Pneumatics component Airtac from Taiwan; |
Omron PID Temperature Controller; | |||
Delta 7 inches from Taiwan; | Piab Vacuum Generator From Sweden; |
Convexity Product Settle
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
The Packaging Machinery will be filled with desiccant all the part and packed by film preservative film firstly to avoid moist .Then The machine will be packed by plastic bag. Finally, the whole machine will be packed by composite material box .
1.what's payment terms ,trade terms you accept ?
Copyright © 2019 KEEPACKAGING CO., LTD.| All Rights Reserved Design