KEEPACKAGING CO., LTD.
contact sales at jujiao.
|Bag Width:||Bag Length:||Tubular Material:|
|110mm ≤ Width ≤ 210 mm;||120mm ≤ Length ≤ 310 mm;||Tubular reel Roll;|
|Pneumatics component SMC;|
|Omron PID Temperature Controller;|
|Winview Colorful Panel from Taiwan;||Piab Vacuum Generator From Sweden;|
* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;
1.Safety Infeed hopper
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
2.Important Feature Grippers’ working Position
* The Linear Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Linear machine than normal pouch machine because Grippers’ holding position
Current Pouch Machine’s Grippers
* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;