Keepac  >  AI - Page Sitemap  >  Keepac Top food packaging machine Supply for food
Keepac Top food packaging machine Supply for food

Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food
  • Keepac Top food packaging machine Supply for food

Keepac Top food packaging machine Supply for food

Fabrication Feature
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
It takes a few minutes to do the Clean with only one person.
Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac Top food packaging machine Supply for food-1
Keepac Top food packaging machine Supply for food-2
Keepac Top food packaging machine Supply for food-3


Working Range:


ModelBag WidthBag Length
MDP-S120mm ~ 260 mm120mm ~ 300 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac Top food packaging machine Supply for food-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac Top food packaging machine Supply for food-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac Top food packaging machine Supply for food-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac Top food packaging machine Supply for food-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac Top food packaging machine Supply for food-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac Top food packaging machine Supply for food-9


4.Important Feature Grippers’ working Position

Keepac Top food packaging machine Supply for food-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac Top food packaging machine Supply for food-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac Top food packaging machine Supply for food-12
Keepac Top food packaging machine Supply for food-13
Keepac Top food packaging machine Supply for food-14

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac Top food packaging machine Supply for food-15
Keepac Top food packaging machine Supply for food-16



The design of Keepac food packaging machine is completed by our thoughtful designers who keep the health&safety standards and environmental protection concepts in mind. A variety of accessories can be selected to meet different demands
Keepac food packaging machine is made of quality steel which requires sophisticated processing techniques. For example, the steel has to be cleaned, sandblasted, polished, and acid passivated. All these procedures are carried out by professional technicians. It is designed and manufactured on a basis of our 8 year experience in rugged devices
Developed by a professional R&D team, Keepac food packaging machine has ultra-sensitive and responsive surface. The team always strive to improve its screen touch technology so as to provide better writing and drawing experience. It is assembled in the dust-free workshop
The operating system of Keepac food packaging machine is exclusively developed by our R&D teams. They work hard to meet the different requirements of business owners while keeping up with trends of the POS system. This product can be customized so as to better run it
The production of Keepac food packaging machine is strictly in line with the hardware products workflow such as CNC machining, cutting, welding, and surface treatment. This product can be customized so as to better run it
We have expanded the quality inspection system from products to include product parts. All materials such as touch panel, display and camera, are quality controlled strictly
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...