Keepac  > 

AI - Page Sitemap

 > 

Keepac stainless steel 304 snack food packaging machine manufacturers for beverage

Keepac stainless steel 304 snack food packaging machine manufacturers for beverage

Keepac stainless steel 304 snack food packaging machine manufacturers for beverage

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Premade Pouch/ Doypack Pouch/ Pre-openned Zipper Pouch
Max Speed
30 BPM
Power
220V/50HZ Single Phase 5 Amps
Air
6Kg/cm2(0.5-0.6MPA), 0.4CBM per min(400L/mini);
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Mini Doypack Features
BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation

BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.


Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-1
Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-2
Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-3


Working Range:


Standard: Stainless Steel 304 Frame


ModelBag WidthBag Length
Duplex 200100mm ~ 200 mm100mm ~ 300 mm


Electronic:

Mitsubishi PLC;


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Application;


Mechanical:
Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;


Safety Feature


Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-4
Interlock & Safety Relay;
Interlock;
Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-5
Omron Safety Relay;


Options


Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-6

Horizontal Zipper Opener


The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;

Hot Stamp Printer
* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm
Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-7

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;


Quick Release conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency inverter Speed control;
Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-8
Keepac stainless steel 304 snack food packaging machine manufacturers for beverage-9



Keepac vegetable packaging machine is manufactured under a series of steps. Its mechanical components have to be cut, welded, dried, sprayed, and so on. There is a LED light to indicate the prompt passway status
The mechanical parts of Keepac vegetable packaging machine are manufactured using different machining workmanship. They have to experience bending, shaping, cutting, welding, die-sinking, high-speed drilling, milling, grinding, polishing and finishing. It has already passed the aging test before leaving the factory
Keepac vegetable packaging machine has passed the test which characterizes its designs for how well it promotes heat and moisture flow away from the body. There is a LED light to indicate the prompt passway status
The manufacture of Keepac vegetable packaging machine complies with regulatory requirements. It mainly meets the requirements of many standards such as EN1728& EN22520 for domestic furniture. Under the emergency situation, the channel offered by the product allows people to pass freely
Keepac snack food packaging machine has a scientific design. It is based on environmental/climatic factors such as light, temperature, wind, sound, touch or passenger/user demand. There is a LED light to indicate the prompt passway status
This product has the required safety. It can perform tasks in a dangerous environment that humans cannot operate. It provides a fast pass speed, suitable for a large flow of people
This product is the protector of the item. It effectively protects the item from physical shocks such as impact, wetting and bruising. It has multiple pairs of IR sensors, making a logical judgment on the behaviors of pedestrians
The product has overload protection function for its components. During the design, it is built with a thermal overload relay to guard against the damage caused by long-term overload operation. It can implement anti-reverse, anti-tailing, anti-pinch, and other alarm functions more accurately
The product has standard height and length measurements and as such, it provides modular elements that can be combined into larger structures. Lossless mechanism structure is based on German technology, which can ensure the long lifespan of the product
This product can provide constant results. It does not feel tired and serious mistakes, nor does it suffer from repetitive strain injuries. The direction controlled by the product can be adjustable
The whole manufacture process for vegetable packaging machine is finished in KEEPACKAGING CO., LTD., so we can fully guarantee quality and technology. There is a LED light to indicate the prompt passway status
KEEPACKAGING CO., LTD. has taken advantage of various means to promote the competitiveness of its snack food packaging machine. It can be supplied with different entrance management systems for different application scopes
KEEPACKAGING CO., LTD. consists of a the leading technical team from vegetable packaging machine trade. It can distinguish true and fake tickets and improve the efficiency of admission in public places
Anytime you place order for our snack food packaging machine, we will make fast response and deliver at our earliest time. The product has the advantage of rust resistance
KEEPACKAGING CO., LTD. will do our utmost to provide relative certificates about our vegetable packaging machine if necessary.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...