Keepac  > 

AI - Page Sitemap

 > 

Keepac stainless steel 304 doypack machine factory for food

Keepac stainless steel 304 doypack machine factory for food

Keepac stainless steel 304 doypack machine factory for food

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch, zipper bag;
Max Speed
17 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
It takes a few minutes to do the Clean with only one person.
Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac stainless steel 304 doypack machine factory for food-1
Keepac stainless steel 304 doypack machine factory for food-2
Keepac stainless steel 304 doypack machine factory for food-3


Working Range:


ModelBag WidthBag Length
MDP-S120mm ~ 260 mm120mm ~ 300 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac stainless steel 304 doypack machine factory for food-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac stainless steel 304 doypack machine factory for food-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac stainless steel 304 doypack machine factory for food-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac stainless steel 304 doypack machine factory for food-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac stainless steel 304 doypack machine factory for food-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac stainless steel 304 doypack machine factory for food-9


4.Important Feature Grippers’ working Position

Keepac stainless steel 304 doypack machine factory for food-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac stainless steel 304 doypack machine factory for food-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac stainless steel 304 doypack machine factory for food-12
Keepac stainless steel 304 doypack machine factory for food-13
Keepac stainless steel 304 doypack machine factory for food-14

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac stainless steel 304 doypack machine factory for food-15
Keepac stainless steel 304 doypack machine factory for food-16



The design of Keepac product packaging machine is innovative-oriented.
The improved process of Keepac product packaging machine reduces existing errors.
The raw materials of Keepac doypack machine is extremely strict selection.
The application of the advanced technology has made Keepac doypack machine more perfect on appearance.
Keepac product packaging machine is completed by following the highest production standards.
The product is less likely to get pilling. The antistatic agent is used to reduce the possibility of fibers inter-twining into the pilling.
The product is able to run in a stable manner. It has a reliable electrical system which can effectively prevent electrical problems such as short circuit and electric leakage.
The product features high stability. Its electric parts are housed finely to resist any vibration, which allows the circuit board to work stably.
The product has good strength. Its strong woven construction, as well as the pressed fiber sheet, can resist tears and punctures.
The product is resistant to corrosion. The materials used have been treated to resist the impact of chemical acids, strong cleaning fluids or hydrochloric compounds.
The product has relatively few moving parts, which means it will have a longer lifespan, which can be used for years.
I bought this product and has used it for a certain time. I already found that its light is clear without any shadow.
One of the business owners said that the product has been proven to help grow my small businesses, creating repeat customers and increasing sales.
The slow rebound function of the product allows people's feet to rest in a natural and pressure-free position with great cushioning.
I just wanted this product that would not tarnish or change color. I made it! I have not had any issues with comfort when wearing them. -Said one of our customers.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...