The quality of Keepac product packaging machine is tested. It has been tested for strength, ductility, impact resistance, hardness, and fracture toughness. It is of high accuracy, which helps customers save materials2.
This product has been widely used in the industry due to its excellent properties. Less maintenance is required for this machine3.
This product has good durability and is suitable for long-term use and storage. This machine can be functioned in both manual and automatic modes4.
The implementation of the quality management system ensures that products conform to international standards. It is air-, steam-, and water- resistant
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|MDP-LG||130mm ~ 300 mm||130mm ~ 420 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CSA,UL Application;
Interlock & Safety Relay;
Quick Release conveyor
* Quick Release Fabrication; / * Discharge Output Height 900mm; / * Emergency Stop with Frequency inverter Speed control;
KEEPACKAGING CO., LTD. is highly regarded in the chips packaging machine field. KEEPACKAGING CO., LTD. has been paying attention to the innovation of new products and new technologies.2.
KEEPACKAGING CO., LTD. has a complete system for QC.3.
There is a strict quality control system during the production of food packaging machine . In our company, sustainability goes far beyond reducing carbon emissions or paper usage — it's about embedding the business practices that enable us to do more good and make positive contributions to the people with which we work. Check now!