Keepac  > 

AI - Page Sitemap

 > 

Keepac staight flow design seal packing machine manufacturers for standup pouch

Keepac staight flow design seal packing machine manufacturers for standup pouch

Keepac staight flow design seal packing machine manufacturers for standup pouch

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch, zipper bag;
Max Speed
20 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac staight flow design seal packing machine manufacturers for standup pouch-1
Keepac staight flow design seal packing machine manufacturers for standup pouch-2
Keepac staight flow design seal packing machine manufacturers for standup pouch-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac staight flow design seal packing machine manufacturers for standup pouch-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac staight flow design seal packing machine manufacturers for standup pouch-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac staight flow design seal packing machine manufacturers for standup pouch-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac staight flow design seal packing machine manufacturers for standup pouch-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac staight flow design seal packing machine manufacturers for standup pouch-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac staight flow design seal packing machine manufacturers for standup pouch-9


4.Important Feature Grippers’ working Position

Keepac staight flow design seal packing machine manufacturers for standup pouch-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac staight flow design seal packing machine manufacturers for standup pouch-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac staight flow design seal packing machine manufacturers for standup pouch-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac staight flow design seal packing machine manufacturers for standup pouch-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac staight flow design seal packing machine manufacturers for standup pouch-14
Keepac staight flow design seal packing machine manufacturers for standup pouch-15
Keepac staight flow design seal packing machine manufacturers for standup pouch-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac staight flow design seal packing machine manufacturers for standup pouch-17
Keepac staight flow design seal packing machine manufacturers for standup pouch-18



Keepac form fill and seal packaging machines is superior in raw materials: Its materials are environmentally friendly, doing no harm to the environment. They are strictly selected complying with the highest packaging standard. It can restain its original luster over time
The design of Keepac seal packing machine involves 3D imaging, which refers to both the tools and the process for the collection of 3D digital data from physical objects. Its strength enables it to withstand vibrations
Keepac seal packing machine has undergone workmanship assessment to ensure that the stitching, construction, and embellishments can be up to the international clothing standards. This product is easy to clean and be sanitized
Keepac form fill and seal packaging machines becomes a finished product after a series of stages, such as material preparation, CAD designing, material cutting, sewing, pattern making, and quality inspection. The product is not susceptible to rot, termites, or mold
Keepac seal packing machine is manufactured with environmental consciousnesses in mind. During the planning of the sauna, the most efficient way to use the wood resource is found. [卖点、特色
This product is durable. The steel used in it is handled by oxidation, hence, it will not rust and easily fall apart. This product is easy to clean and be sanitized
The product is characterized by a good hydrophobic property, which allows the surface to dry quickly without leaving water stains. This product is notable for its magnetic property
Owing to its reliability, the product is not subject to the jamming signal or noise caused by its inner components. Its strength enables it to withstand vibrations
The product is ecologically friendly. The traditional refrigerant chemicals that will result in the erosion of the ozone layer has been totally eliminated. Its thicknesses, widths, and lengths are highly customizable according to the needs of customers
The product features an operating temperature range. In extreme environments, heating and cooling may be required to keep it within its operating temperature range. This product can last for a long time due to its fatigue resistance
KEEPACKAGING CO., LTD. constantly provide training for our workers to improve quality. This product can last for a long time due to its fatigue resistance
KEEPACKAGING CO., LTD. has increased its competitiveness in seal packing machine market through strenuous efforts. The product is not susceptible to rot, termites, or mold
Meticulous package make sure the form fill and seal packaging machines in good condition after delivery. Its dimensional stability makes it not prone to mechanical forces
KEEPACKAGING CO., LTD.'s emergence has promoted the rapid and healthy development of form fill and seal packaging machines industry. This product has been applied in many industries such as petroleum chemical, metallurgy, pharmaceutical machinery, paper making, food, and shipbuilding
Along the way, KEEPACKAGING CO., LTD. has transformed itself into a competitive company with seal packing machine as its core business. This product has the advantage of uniform thickness
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...