Keepac potato packing machine is carefully designed. Mechanical behavior such as statics, dynamics, the strength of materials, vibrations, reliability, and fatigue are taken into consideration. 2.
The product has the advantage of stacking flexibility. It is made up of single panels suspended from the headrail, and the panels may be stacked at the ends of the partitions or remotely in the appropriate stacking area. 3.
The product is energy efficient, which not only has a positive impact on the environment but it also greatly reduces people's energy bills. 4.
The product is widely used to drown out the noise, eliminate vibration, or protect the equipment from the elements.
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|Duplex 200||100mm ~ 200 mm||100mm ~ 300 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Application;
Interlock & Safety Relay;
The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch
is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and
And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
Based in China, KEEPACKAGING CO., LTD. is a famous company in the domain of manufacturing and supplying of quality potato packing machine . 2.
Keepac is booming now for its chips packaging machine. 3.
We work to create joint sustainability initiatives by identifying and building partnerships with our customers, suppliers and the communities in which we operate. We take part in various environmental certifications, such as those that assure consumers that goods they purchase from us are packaged in materials that have been obtained through sustainable and responsible means. We are committed to maintaining the highest ethical standards in our business. We have implemented an integrity management plan that sets out the administrative structure and measures for integrity management. Check it!
project design,performance introduction,technical agreement,contract signing,production testing and we can customized production according to your requirements.
we will provide you with the latest process in the product assembly,packing and transportation.
◎We provide videos and instruction manual to show the process of installation.
◎We provide training for installation for free in our factory.
◎We can send technician to buyer's factory to install the machine and provide training service.
◎ For our machines, we will provide some spare parts and easy broken parts free of charge when delivering.
◎We will have one year free warranty period. During warranty period, if there is any malfunction for the machine, we will try our best to solve the problem within 24 hours. If there are some spare parts needed to be replaced, we will provide the spare parts for free. Beyond warranty, we will charge the cost price for spare parts.
◎We provide technical support for our machines for life-long time. We can provide installation and maintenance service at your place if you need.
Small pouch potato chips packing machine with Z type conveyor
1. Before packaged, the machines will be tested strictly to guarantee the stability and high accuracy.
2.After tested, the machines will be wrapped with plastic sheet and carefully packed in wooden cases
☂ Each Machine with plastic film package first, then placed in a wooden case, wooden case with a foam filling.
✈ We loaded the truck with heavy trucks for loading the cargo to the harbor terminal.At the dock we pack the goods in containers and ship them abroad.
Delivery Detail :
☀ Shipped in 15 days after payment.
Please let us know the follow packing details when you need, so that we can check if this model is suitable for your case.Thank you in advance.
●Bag Width, Bag Length. (Similar Picture)
●Packing film material.