Keepac snack packaging machine is finely designed. Its design is finished by considering many factors such as frame construction, control system design, mechanism design, and operating temperatures. 2.
The service life of this product is highly guaranteed by the strict test procedure which is in line with international standard. It is tested to be high performance and user-friendly. 3.
The automatic grain packing machine are all qualified in Keepac. 4.
As a company who specializes in operating the business of producing automatic grain packing machine , Keepac has been widely recognized by most customers.
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|Duplex 200||100mm ~ 200 mm||100mm ~ 300 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Application;
Interlock & Safety Relay;
The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch
is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and
And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
Being one of a leading automatic grain packing machine manufacturer, KEEPACKAGING CO., LTD. owns a high reputation in China market for the strong manufacturing capability. 2.
We are supported by professional teams. Combining with our unique technologies and processes, our exceptional in-house design, science, and engineering teams can create market-ready products designed for our customers. 3.
Our company plays an active role in protecting natural resources and reducing environmental impact. We understand the impact that our factory may have on the environment, including changes in water quality and climate change. This is why we have long set environmental goals and share progress on a regular basis. We value social sustainability. We put efforts to understand the impact of our events on the communities, and then work to amplify good influences and avoid bad influences. Customer satisfaction is what we pursue. In order to provide them suitable and targeted products and services, we often conduct market surveys to get an insight into customers' needs and concerns. Our company is committed to reducing the environmental impact of our businesses and promoting the sustainable development of natural resources. To achieve this mission, we will conduct business in accordance with applicable environmental laws, regulations, and policies.