Keepac  > 

AI - Page Sitemap

 > 

Keepac New grain packing machine manufacturers for pre-openned zipper pouch

Keepac New grain packing machine manufacturers for pre-openned zipper pouch

Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch
  • Keepac New grain packing machine manufacturers for pre-openned zipper pouch

Keepac New grain packing machine manufacturers for pre-openned zipper pouch

Mini Doypack Features
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Mini Doypack Features
BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened. TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.


Keepac New grain packing machine manufacturers for pre-openned zipper pouch-1
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-2
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-3


Working Range:


Standard: Stainless Steel 304 Frame


ModelBag WidthBag Length
MDP-S100mm ~ 300 mm100mm ~ 300 mm


Electronic:

Mitsubishi PLC;


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Application;


Mechanical:
Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;


Safety Feature


Keepac New grain packing machine manufacturers for pre-openned zipper pouch-4
Interlock & Safety Relay;
      Interlock;
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-5
Omron Safety Relay;


Options


Pouch Auto Feeder
* Auto Feed the pouch to the machine to run continuously;
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-6
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-7
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-8

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;


Quick Release conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency inverter Speed control;
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-9
Keepac New grain packing machine manufacturers for pre-openned zipper pouch-10



The design of Keepac product packaging machine is sophisticated. It involves the application of such subjects as thermodynamics, electrical theory, hydraulics, engines, and pumps. The product has the characteristics of uniform luminescence
Keepac grain packing machine goes through professional design. It is created by experts who have vast knowledge and experience in the following standards: IP Protection, UL, CE, environment and explosive Std, CSA, FM, etc. Each finished product has passed TUV, KC, and EMC international certifications
There are many important considerations in the design of Keepac grain packing machine. They are the type of load and stresses caused by the load, motion of parts, form and size of the parts, etc. The products can be widely used for lighting up the wall, fence, trees and so on
There are careful material selections in Keepac product packaging machine manufacture. The materials are selected mainly in consideration of the force exerted on the element and the production cost. The product enjoys the characteristics of high efficiency and low light decay
The design of Keepac product packaging machine involves all the disciplines of mechanical engineering. They are Friction, Energy Transport, Material Selection, Statistical Descriptions, etc. The product has an optimal stability performance
It can endure the stresses of real-world working conditions. All components are designed with force analysis to ensure the strength of withstanding forces during operation. The design of the product's structure is compact and beautiful
This product has the required strength. Its elements are designed considering the forces acting on it, so it will not distort or break when loads are applied. The product enjoys the characteristics of high efficiency and low light decay
This product has a precise dimension. Its manufacturing process adopts the CNC machines and advanced technologies, which guarantee its accuracy in size and shape. The products are mainly exported to America, Australia, Germany, Canada, etc
It is endowed with convenient features. Its operating features have been carefully studied. The controlling panel is located on the basis of convenient handling. It features strong concentrating performance and can give high brightness
It has good strength. It has a proper size which is determined by the forces/torques applied and the materials used so that failure (fracture or deformation) would not occur. With highly bright LED chip, the product produces no radiation, protecting human health
This product is corrosion resistant. It has been tested in salt fog harsh environment to determine its resistance to the effects of a salt atmosphere. The products are mainly exported to America, Australia, Germany, Canada, etc
One of the biggest advantages in the use of this product is the considerable increase in the skill and productivity of laborers. Customized products can be made to satisfy the needs of customers
With this product, more work can be done with less man input and the cost of production will be decreased. Made of high-quality die casting aluminum alloy, the product features good heat dissipation
This product helps man to reduce his or her job. And because of this, the money that is required to pay is totally reduced. The product enjoys the characteristics of high efficiency and low light decay
The use of this product helps achieve large-scale production and can reduce costs to levels never dreamt of before. Made of high-quality die casting aluminum alloy, the product features good heat dissipation
There will be a cut in the payment of labor prices because the use of this product can replace manual labor. The product is totally energy-saving and eco-friendly and does no pollution to the environment
This kind of product can improve the working efficiency of work staff. The operation process is very simple and convenient. Customized products can be made to satisfy the needs of customers
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...