Keepac  > 

AI - Page Sitemap

 > 

Keepac New chips packaging machine Suppliers for food

Keepac New chips packaging machine Suppliers for food

Keepac New chips packaging machine Suppliers for food

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Premade Pouch/ Doypack Pouch/ Pre-openned Zipper Pouch
Max Speed
16 BPM
Power
220V/50HZ Single Phase 5 Amps
Air
6Kg/cm2(0.5-0.6MPA), 0.4CBM per min(400L/mini);
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Mini Doypack Features
BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation

 BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
 BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
 TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
 FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
 SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
 MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.



Working Range:


Standard: Stainless Steel 304 Frame


ModelBag WidthBag Length
MDP-S100mm ~ 300 mm100mm ~ 300 mm
MDP-L130mm ~ 300 mm130mm ~ 420 mm


Electronic:

Mitsubishi PLC;


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Application;


Mechanical:
Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;


Safety Feature


Keepac New chips packaging machine Suppliers for food-1
Interlock & Safety Relay;
      Interlock;
Keepac New chips packaging machine Suppliers for food-2
Omron Safety Relay;


Options


Pouch Auto Feeder
* Auto Feed the pouch to the machine to run continuously;
Keepac New chips packaging machine Suppliers for food-3
Keepac New chips packaging machine Suppliers for food-4
Hot Stamp Printer
* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm
Keepac New chips packaging machine Suppliers for food-5

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;




Keepac noodles packing machine will be analyzed after it is produced. It will be professionally analyzed by our technicians in the perspectives of chemical, mineralogical, and particle size. The materials of our products include ABS, POM, PC, PA6, PA66, PMMA, aluminum, iron, steel, bake-lite, EVA and etc
The ultimate fineness of Keepac noodles packing machine is determined by the crushing process. It is often crushed under the mechanized crushers or mills. We provide one stop service of Design-Prototype-Injection mould
The primary operations of Keepac chips packaging machine cover several parts. The comminution and concentration are the most preliminary and essential parts and some modern mineral processing step such as sampling analysis may be conducted.
The raw materials of Keepac noodles packing machine are extracted with the help of various technology. The advanced digging technology and the environmental control systems for managing airflow, water flow, and temperature guide the whole preliminary process. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking
Keepac noodles packing machine will be extracted using different methods. Based on the demanded metal ingredients, it can be processed by physical, chemical, or electrolytic methods. Our products are well packaged and protected during transportation
The product will not release a disturbing odor. The wood materials are specially heat-treated to withstand the high temperatures, producing no unhealthy gases. PMMA material makes plastic products clear and transparent
The product has the advantage of high accuracy. The check function has been built-in the software to ensure that the information entered is accurate and correct. PMMA material makes plastic products clear and transparent
The product delivers powerful brightness. Thanks to its innovative design, the new type of illuminating elements can emit stronger brightness under the same energy consumption. The materials of our products include ABS, POM, PC, PA6, PA66, PMMA, aluminum, iron, steel, bake-lite, EVA and etc
The product is characterized by its nearly zero porosity. During its production, it has gone through the enameling process which diminishes the porous problem. We have professional QC team to strictly control quality of our products
The product is not prone to discoloration. It will be not easily affected by chemical stains, tainted water, fungi, and mold. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking
The product presents an opportunity for building customer trust and winning more business. The simulation of our products is good
The product is widely acknowledged and accepted in the industry. Equipped with advanced machines, we can provide customized service for our products
This product is in extensive demand among our clients and is widely used in the global market. We have professional QC team to strictly control quality of our products
The product strikes a perfect balance between price and performance and is now widely used in the market. We have professional QC team to strictly control quality of our products
These offered products are widely demanded in the market.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...