The quality control of Keepac candy packaging machine is conducted rigorously in order to meet the requirements in the solar product industry. It is inspected in the short circuit protection, charge and discharge performance, as well as energy utilization capacity. Less maintenance is required for this machine2.
Apart from our high quality products, KEEPACKAGING CO., LTD. wins the trust of our customers with thoughtful and meticulous service. All parts in contact with the product can be sterilized3.
The product is now extensively used in the market and leading the industry trend. It features auto-adjustable guides to ensure precise loading position
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|MDP-S||100mm ~ 300 mm||100mm ~ 300 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Application;
Interlock & Safety Relay;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
KEEPACKAGING CO., LTD. is a leading manufacturer and supplier of small food packaging machine for global customers. We have QC team to help check the details of snack food packaging machine .2.
By mainly satisfying the needs of developing enterprise, Keepac has successfully introduced high technology.3.
KEEPACKAGING CO., LTD. has dedicated R&D, sales and service teams. Client-oriented was the focus throughout the evolution of Keepac brand. Inquire now!