Different machining approaches are used in processing mechanical parts of Keepac best packing machine . These mechanical parts, including engine, motor, and hydraulic components, will go through thermal treatment, honing machining, or wire cutting based on their actual usages and structures. 2.
The water treating process will not release any toxic substances caused by the chemical reaction. Its filter system has chemical stability which allows it to withstand acid and alkali liquid. 3.
The product features enough hardness and toughness. The primary seal part is usually made of welded metal which has strong hardness. 4.
This product makes work easier and reduces the need for employing many people. This has led to a reduction in human labor costs.
◪ The machine runs straight flow design makes accessibility of parts.
◪ It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
◪ It takes a few minutes to do the Clean with only one person.
◪ Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
◪ The machine is full protector which is kept the operator being out of the moving component during the machine running.
|Bag Width:||Bag Length:||Tubular Material:|
|110mm ≤ Width ≤ 210 mm;||120mm ≤ Length ≤ 310 mm;||Tubular reel Roll;|
|Pneumatics component SMC;|
|Omron PID Temperature Controller;|
|Winview Colorful Panel from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Certificate;
* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;
1.Safety Infeed hopper
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
2.Important Feature Grippers’ working Position
* The Linear Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Linear machine than normal pouch machine because Grippers’ holding position
Current Pouch Machine’s Grippers
* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;
We are a leading producer of automatic chips packing machine both at home and abroad. 2.
There are many production lines to ensure capacity and strict QC to ensure quality in KEEPACKAGING CO., LTD.. 3.
KEEPACKAGING CO., LTD. is still working on to offer the distinguished types of packaging machines . Check now! KEEPACKAGING CO., LTD. aims to make the dreams of customers and employee to become true. Check now! The culture of customer first is emphasized in Keepac. Check now! KEEPACKAGING CO., LTD. provides customers with excellent products and services. Check now!