Keepac  > 

AI - Page Sitemap


Keepac mini snack food packaging machine Supply for beverage

Keepac mini snack food packaging machine Supply for beverage

Keepac mini snack food packaging machine Supply for beverage

Brand Name
Place of Origin
Start Port
OEM/ODM Availability
Delivery Time
65 Days
Bag shape
Premade Pouch/ Doypack Pouch/ Pre-openned Zipper Pouch
Max Speed
30 BPM
220V/50HZ Single Phase 5 Amps
6Kg/cm2(0.5-0.6MPA), 0.4CBM per min(400L/mini);
Get Latest Price
Get the latest price
Quantity Needed:

Mini Doypack Features
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation

Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.

Keepac mini snack food packaging machine Supply for beverage-1
Keepac mini snack food packaging machine Supply for beverage-2
Keepac mini snack food packaging machine Supply for beverage-3

Working Range:

Standard: Stainless Steel 304 Frame

ModelBag WidthBag Length
Duplex 200100mm ~ 200 mm100mm ~ 300 mm


Mitsubishi PLC;


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
No bag No dump;
Easy Adjustable;
Low Operating & Maintenance cost;
Multi Bag Format;
InterLock, CE Application;

Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;

Safety Feature

Keepac mini snack food packaging machine Supply for beverage-4
Interlock & Safety Relay;
Keepac mini snack food packaging machine Supply for beverage-5
Omron Safety Relay;


Keepac mini snack food packaging machine Supply for beverage-6

Horizontal Zipper Opener

The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;

Hot Stamp Printer
* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm
Keepac mini snack food packaging machine Supply for beverage-7

Convexity Product Settle

* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;

Quick Release conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency inverter Speed control;
Keepac mini snack food packaging machine Supply for beverage-8
Keepac mini snack food packaging machine Supply for beverage-9

Our independent design for snack food packaging machine can greatly help to improve our brand awareness. This product is highly resistant to scratches
snack food packaging machine is of reasonable construction, high performance and reliable operation, having met the requirements of normalization and standardization. Processed by advanced CNC machines, this product has the desired precision
With the widely raw materials and snack food packaging machine, this snack food packaging machine is worth expanding and application. This product is easy to care for and requires little maintenance
Our vegetable packaging machine touches softly and smoothly. This product can stand up to a certain degree of wear and tear
The design of vegetable packaging machine is excellent and the hand feels vegetable packaging machine. Its ergonomic design makes it easy to put on and take off
This product has a clean seam appearance. Its seams are distributed evenly and completely flat, providing a smooth finish. This product is an ideal gift for lovers, friends, or parents
This product has a durable surface. The materials and surface treatment endow its surface with abrasion, impact, scrape and scratch resistance. This product stands out for its great lightfastness
The product can resist high temperatures. It is made of heat-resisting fabric which features a high melting and decomposition point. This product is of great collection value
This product features excellent dimensional stability. After it is torn or twisted, it shows no changes in its dimensions. The printing methods for its logo are optional, such as laser and engraving
This product will not be out of shape. Securely laid in the shoe, it can keep its original shape and offer reliable support for a long time. Combining elegance and simplicity, this product is popular with jewelry lovers
The product is in high demand at home and abroad thanks to its considerable economic benefits. Combining elegance and simplicity, this product is popular with jewelry lovers
The product has attracted a large number of customers, prove to be a hot product in the market. It is able to retain its original luster when worn for a long time
Customers can request a variety of colors and print designs. This product is able to direct natural light and has good quality
This product is highly appreciated by customers consistently due to these features. This product stands out for its exceptional hardness
The product is well-known and widely accepted for its great economic benefits. This product has a feeling of uniqueness and individuality
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...