Standard: Stainless Steel 304 Frame
Model | Bag Width | Bag Length | |
MDP-S | 100mm ~ 300 mm | 100mm ~ 300 mm | |
MDP-L | 130mm ~ 300 mm | 130mm ~ 420 mm | |
Electronic: | Mitsubishi PLC; | Pneumatic: | Pneumatics component Airtac from Taiwan; |
Omron PID Temperature Controller; | |||
Delta 7 inches from Taiwan; | Piab Vacuum Generator From Sweden; |
Convexity Product Settle
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
Solid(Granule) Weigh-Fill-Seal Production Line | ||
Equipment Model | RZ8-200 | RZ8-300 |
Bag Size | W: 65~150mm L: 70~210mm(date coding requires≥ 140mm length) | W:160~300mm L: 100~400mm(date coding requires≥ 140mm length) |
Filling Range | 5~1500g | 5~2500g |
Packing Speed | 20~55Bags/min(depended on the product and filling weight) | 10~40Bags/min(depended on the product and filling weight) |
Package Accuracy | Error≤±1% | |
Weight | 1000kg | 2000kg |
Dimension | 1635mm*1455mm*1480mm (L,W,H) | 1645mm*1645mm*1640mm (L,W,H) |
Total Power | 2.3kw | 4kw |
Driving Power Source | 380V Three-phase Five-line 50HZ | |
Control Power Source | DC24V | |
Compressed Air Requirement | ≥0.45m3/min(Compress air is provided by user) | ≥0.35m3/min(Compress air is provided by user) |
Copyright © 2019 KEEPACKAGING CO., LTD.| All Rights Reserved Design