|Model||Bag Width||Bag Length|
|MDP-S||120mm ~ 260 mm||120mm ~ 300 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 10 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;
Easy Operation, No Key inserted;
check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;
More friendly like Pad operation;
Hand Wheel to adjust pouch magazine for different bag width;
2.Safety Infeed hopper
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
3.Transverse Moved Bars on Servo Mini
Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.
4.Important Feature Grippers’ working Position
Servo Mini’s Grippers
* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.
Current Pouch Machine’s Grippers
* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;
Convexity Product Settle
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.
1. LD series main frame
|2. Manual feeding conveyor|
|3. Product conveyor|
|Main Performance And Structure Features:|
1. Material measuring by manual.
|2. It`s convenient to input prize, lottery and uneasy measuring material or multi-type packing products|
|3. A complete set of machines are economical and practical|
|Specification (With the product size selection models) :|
|Film Roll diameter||Max.320mm|
|Range of Measurement||150-1500ml|
|Power||220V 50/60Hz 2KW|
|Machine Quality||About 650KG|
Suitable for packing for all kinds of grain material,sheet material,strip material and abnormity material
which such as candy,melon seeds, chips, peanuts, nutlet , preserved fruit, jelly,
biscuit, confect, camphorball,currant,almond,chocolate,fibert,cornpet foodstuff,
dilatant foodstuff,hardware and plastic can be weighed by the ration.
|Similar Main frame Model Specification :|
Suitable for automatic packaging bulk grain, slice, short bar
mate rial products such as puffy food, shrimp chip
|Film Roll diameter||Max.320mm||Max.320mm|
|Range of Measurement||2000ml||4000ml|
|Power||220V 50/60Hz 3KW||220V/3KW|
|Machine Quality||About 680KG||About 750KG|
We take great pride in our work and in the wide variety of products that we offer.
For offer the right model machine, please tell the following product’s info. Thank you in advance.
The manufacturing plant and facilities, designed with modern criteria complying with CE directives, and the advanced process
technology based on an economy of scale production, place Coretamp among China producers for the top quality of products
as well as for the quantity and variety of solutions proposed and sold.
Research and Development Department is equipped with advanced tools and disposes of a qualified team of informatics, electronics
and packaging experts involved in the study and experimentation of new solutions, indispensable for new projects and for the
improvement of standard equipment.
Our aim is the complete customer's satisfaction, through research and trials of new automated packaging systems and technical solutions.
Designing and building automatic packaging machines technologically advanced, durable and reliable, interfaced with modular composed
automatic feeders, easy to be integrated into automated packaging systems.
Our Sales and Service Network
Entrusted to Certified Agents of proven professional competence and expertise, employing Record trained service engineers, stocking
a suitable inventory of original spare parts for immediate delivery.
Q:What is your Installation Services?
Installation Services are available with all new machine purchases.
We will provide the user manual and videos to support for installing, debugging, operation of the machine, it will indicate you how to use this machine well.
Q:What about your Guarantee of quality :
A:The machine is 1 year warranty, all machine part can be replaced for free within 1year if broken(not including man made).And offer lifetime after sale service
Q:How about the after-sale service?
(1)More than 12 hours after-sale online service one day.
(2) we have engineers available to service machinery overseas.The service charge, include: service fee USD100/day, VISA fee, board round-trip ticket, room and eat in are buyer's side.
Q: How about the spare parts?
After we deal down all the things , we will offer you a spare parts list for your reference.
Q:Do you also offer the wrapping film?
Yes, we can offer you the plastic roll film, we have a long term cooperated supplier for roll film and the price is favorable.
Q:If we have very special request for the production line,could you help me to do the design?
Experienced mechanical designer customized-design provided.
Q: If we have samples of new products, can you help to analysis and design the machine?
Yes, Our technical department can help to analysis, design and test the new products you offered.
Q:Can I visit your factory?
Sure, Our factory address : Plant 6-11, Floor 1, Building C7 Of New Lighting Source Industrial Base, Langsha, Luocun, Shishan Town, Nanhai Dist, Foshan, Guangdong, China