Keepac  > 

AI - Page Sitemap

 > 

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch
  • Keepac Latest horizontal form fill seal machine Suppliers for standup pouch

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch

This product will help raise the overall production in the economy. Consequently, employment, national income, and the growth rate of the economy will increase. This machine can be functioned in both manual and automatic modes
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The design of Keepac automatic form fill seal machines takes advantage of high-tech. Its parts drawing, assembly drawing, arrangement diagram, schematic diagram, and shaft drawing are all available by the mechanical drawing technologies. It is also widely used for non-food powders or chemical additives
2. This product will help raise the overall production in the economy. Consequently, employment, national income, and the growth rate of the economy will increase. This machine can be functioned in both manual and automatic modes
3. The product beats its competitors in overall performance and durability. It comes with 12 months of warranty


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, It is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine are full protector which is kept the operator being out of the moving component during the machine running.


Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-1
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-2
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-9


4.Important Feature Grippers’ working Position

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-14
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-15
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-17
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-18
Zipper closing device
* Close Zipper After Filling, Before Sealing;
* The Filled bag is passed the Rolled Wheel to close the zipper;
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-19
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-20
Keepac Latest horizontal form fill seal machine Suppliers for standup pouch-21

MiniWeigh Duplex 2H3L(2Heads with 3Liters Weighing bucket)


Filling Range: Up to 1.5Kg
Filling Head Quantity: 2Heads
Filling Speed Up to 20bags/min;
Accuracy:± 2g;
Hopper Volume: 3Liters
Power 220V, Single Phase 50HZ;
Operation Panel: 7 inch touch screen;
1, All parts that contact with filling products are made by SUS 304# and polishing dispose. Meet with G.M.P. Standard;
2, Each Weighing Head have Two Infeed Funnel, Bigger And Smaller. The Bigger infeed funnel is to send out the product with Big power;  The smaller infeed funnel has two feeding funnels to get the good weight.
3, The Miniweigh can do the cleanup by itself after daily production by the weighing hopper;
4, Germany HBM Load Cell



Company Features
1. As a manufacturer of automatic form fill seal machines , KEEPACKAGING CO., LTD. makes a profound impression on customers with rich professional knowledge and good workability.
2. Our company has well-trained workers. Having received extensive training in their field, they are equipped with professional or technical skills and are therefore highly productive.
3. Keepac actively implemented form fill and seal packaging machines requirements to firmly establish a fully developed enterprise in horizontal form fill seal machine industry. Inquire online!
Keepac horizontal form fill seal machine is professionally constructed. It is produced with several parts, including a dynamical system, drive system, execution system, and maneuver-boost control system. This product works well in demanding conditions, especially in winter
Keepac horizontal form fill seal machine goes through serious quality testing after it is produced. It has been certified under many international standards including CCC, CE, and RoHS. This product can stop rust and oxidation from forming inside the engine
The design of Keepac horizontal form fill seal machine has taken many factors into considerations. The electrical safety, mechanical security, and performance of mechanical parts will be thought of seriously. It has excellent oxidation resistance at higher temperatures
The design of Keepac form fill and seal packaging machines has been optimized. Many factors have been considered in terms of thermal properties, surface finish, lubrication, friction, and noise. This product has the advantage of nitrification stability
The manufacture of Keepac horizontal form fill seal machine involves several stages. They mainly include the installations of cams, shafts, and bearing, the design of injection-molded plastic parts, fixtures, and gauges. This product can stop rust and oxidation from forming inside the engine
The product features the desired stiffness. It is resistant to different failure modes thanks to its mechanical properties such as yield strength and hardness. This product stands out for its cleaning and dispersing performance
This product works well under harsh conditions. It can be placed in demanding work environments, such as extreme changes in ambient temperature and humidity. This product has the advantage of nitrification stability
The product is robust in construction. It has a mechanically robust design that can withstand the operating conditions and environments to which it is exposed. This product significantly reduces fuel loss under harsh operating conditions
The product has the advantage of high machining precision. It is controlled by a precisely programmed computer system and processed according to the instructions given in the digital form. This product stands out for its cleaning and dispersing performance
The product is corrosion resistant. It resists corrosion in the presence of industrial and organic chemicals and is not prone to failure under these circumstances. This product is used to improve the machine life
This product has the required stiffness. Due to its mechanical properties, such as tensile strength and hardness, it can withstand different failure modes. This product works well in demanding conditions, especially in winter
Due to its significant economic return, the product is becoming more and more important and widely used. This product features high viscosity and strong adhesion
This product has many excellent properties and is suitable for various fields. It has excellent oxidation resistance at higher temperatures
This product has many advantages and is used by more and more people. By using this product, a continuous tough oil film can be formed on the contact surface between machine parts to reduce scratches
The product has been applied widely in the market and has a great market prospect. This product helps ensure the smooth flow of the oil
Owing to the remarkable characteristics, the product is becoming increasingly widely applied in the market. This product has predominant resistance against water sprinkling
The product has a wide application and a great market value. This product is especially suitable for the modern engine cooling system
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...