Keepac  > 

AI - Page Sitemap

 > 

Keepac Latest food packaging machine factory for pre-openned zipper pouch

Keepac Latest food packaging machine factory for pre-openned zipper pouch

Keepac Latest food packaging machine factory for pre-openned zipper pouch

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Premade Pouch/ Doypack Pouch/ Pre-openned Zipper Pouch
Max Speed
30 BPM
Power
220V/50HZ Single Phase 5 Amps
Air
6Kg/cm2(0.5-0.6MPA), 0.4CBM per min(400L/mini);
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Mini Doypack Features
BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation

BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.


Keepac Latest food packaging machine factory for pre-openned zipper pouch-1
Keepac Latest food packaging machine factory for pre-openned zipper pouch-2
Keepac Latest food packaging machine factory for pre-openned zipper pouch-3


Working Range:


Standard: Stainless Steel 304 Frame


ModelBag WidthBag Length
Duplex 200100mm ~ 200 mm100mm ~ 300 mm


Electronic:

Mitsubishi PLC;


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Application;


Mechanical:
Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;


Safety Feature


Keepac Latest food packaging machine factory for pre-openned zipper pouch-4
Interlock & Safety Relay;
Interlock;
Keepac Latest food packaging machine factory for pre-openned zipper pouch-5
Omron Safety Relay;


Options


Keepac Latest food packaging machine factory for pre-openned zipper pouch-6

Horizontal Zipper Opener


The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;

Hot Stamp Printer
* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm
Keepac Latest food packaging machine factory for pre-openned zipper pouch-7

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;


Quick Release conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency inverter Speed control;
Keepac Latest food packaging machine factory for pre-openned zipper pouch-8
Keepac Latest food packaging machine factory for pre-openned zipper pouch-9



Keepac vegetable packaging machine has to go through a comprehensive QC check including the performance of filter and membrane, PLC controller, and valves. It has obtained Certificate of Utility Model Patent
Keepac food packaging machine is well manufactured. It has to go through a series of production processes including raw material extraction, forming, heating, cooling, and cutting. Antifreeze design is adopted to avoid frost damage
The components and parts of Keepac vegetable packaging machine are guaranteed to meet the food grade standard by the suppliers. These suppliers have been working with us for years and they attach much attention to quality and food safety. Antifreeze design is adopted to avoid frost damage
During the production of Keepac vegetable packaging machine, many crucial and sophisticated processes are conducted, including heat-welding, cementing, sewing, etc. All these above procedures are inspected by specific QC teams. Its cooling capacity is able to match with the actual cooling load, so as to save energy consumption
Keepac vegetable packaging machine is strictly inspected. Not only does it have gone through a machine check on cutting, welding, and surface treatment, but also is inspected by workers. It can be designed to be counter flow type, cross-flow type, and hybrid flow type
vegetable packaging machine is widely utilizing in vegetable packaging machine. Its sheet fillers or media come in many different forms and "microstructures", each with unique characteristics for specific applications
Its comprehensive cost is much lower than that of common vegetable packaging machine. It has an effective dehydrator with a very low drift rate
The product is strictly tested by our quality experts on a series of parameters, ensuring its quality and performance. Its surface treatment has UV inhibitors that are resistant to sun damage
Owning to our new advanced technology, Our food packaging machine is in higher performance. Edge folding technology will reduce wear loss of the filler and save the process equipment from fouling
The features of food packaging machine makes food packaging machine are suitable for food packaging machine. Not a tiny crack will be found on its surface
As the demand for global bases increases, the market prospects for this product are optimistic. Its sheet fillers or media come in many different forms and "microstructures", each with unique characteristics for specific applications
The product is regarded as one of the most promising products in the market. It has been tested for electrical safety, cooling capacity, drift rate, noise and more
After years of improvement, the product has received more and more attention at home and abroad and has great commercial value. It can be designed to be counter flow type, cross-flow type, and hybrid flow type
The price of this product is quite competitive and is widely available in the market. It is IP55/56 rated and is of Class F insulation
This product has achieved good results in practical applications. It is set with inspection gallery for daily maintenance
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...