Keepac  > 

AI - Page Sitemap

 > 

Keepac High-quality seal packing machine for business for food

Keepac High-quality seal packing machine for business for food

Keepac High-quality seal packing machine for business for food

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch, zipper bag;
Max Speed
20 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac High-quality seal packing machine for business for food-1
Keepac High-quality seal packing machine for business for food-2
Keepac High-quality seal packing machine for business for food-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac High-quality seal packing machine for business for food-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac High-quality seal packing machine for business for food-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac High-quality seal packing machine for business for food-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac High-quality seal packing machine for business for food-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac High-quality seal packing machine for business for food-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac High-quality seal packing machine for business for food-9


4.Important Feature Grippers’ working Position

Keepac High-quality seal packing machine for business for food-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac High-quality seal packing machine for business for food-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac High-quality seal packing machine for business for food-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac High-quality seal packing machine for business for food-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac High-quality seal packing machine for business for food-14
Keepac High-quality seal packing machine for business for food-15
Keepac High-quality seal packing machine for business for food-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac High-quality seal packing machine for business for food-17
Keepac High-quality seal packing machine for business for food-18



Keepac potato chips packing machine is delicately manufactured by combining the best materials and the lean production method. Its excellent bulb provides a more comfortable nighttime driving experience
Standard manufacturing: the production of Keepac seal packing machine is based on the advanced technology developed by ourselves autonomously and the complete management system and standards. Its high-speed mute fan system keeps it work at appropriate temperatures
Keepac seal packing machine is fabricated selecting high quality raw materials. With no external driver or connector, this product is easy to use
The design team has been researching Keepac seal packing machine with innovations, keeping up with the trends. This product is able to reduce substantial energy consumption
Keepac seal packing machine is manufactured by highly skilled professionals with rich years of experiences in the industry. Its dependable light source meets industry regulations
Constant inspections: the product is manufactured under the constant inspections which are conducted by the QC team. They carry out an ongoing inspection method to ensure the quality of this product. This product is available in a variety of light colors
The product is certified by quality and has long service life. Its unique heat sink design makes contributes to its excellent cooling capacity
As a result of the implementation of a strict quality management system, product quality has been improved. Its power utilization ratio is up to 90
Compared with similar products, this product has superior performance and long service life. Its robust filament design makes it resistant to scratches
Regular product quality audit is carried out to ensure reliable product quality. This product helps drivers see hazards more easily
This product offers smoothness and textured feeling for people who wear it. People will feel good when holding in hands and comfortable when wearing. This product is absolutely legal for on-road use
The product can guarantee healthy feet because it can minimize the stress put on the sole and offer enough comfort during walking. This product shows only a 2% failure rate
One advantage this product boasts is that it can help to express a lot about an individual’s status, personality, and occupation. This product is able to reduce substantial energy consumption
This product will effectively help align people's feet and finally significantly help correct their gait and improve their body posture. This product has gained the E-Mark certification of the EU market
Headaches, asthma and even more serious diseases like cancer will never follow when people use this healthy piece of furniture. Its excellent bulb provides a more comfortable nighttime driving experience
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...