Keepac mini doypack machine is professionally designed considering the following factors: the functionality of the control system, engineering forces, life cycle, utility, and manufacturability. It will not easily breed mildew and mold2.
Thanks to its energy efficiency, the product not only has a positive impact on the environment but it also greatly reduces people's energy bills. It can deal with different forms of items including powders, granulated products, liquids, semi-liquids, and individual pieces3.
The product is not likely to accumulate too much heat. Its powerful cooling system is designed to maintain the proper temperature of mechanical parts, allowing it to have good heat dissipation. All parts in contact with the product can be sterilized4.
It has the proper size in consideration of the force. Each element of this product is designed with the most suitable size by considering the force acting on it and the permissible stresses for the material used. It features auto-adjustable guides to ensure precise loading position
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
Maximum Weight: 5Kg;
|Model||Bag Width||Bag Length|
|MDD-XLH||300mm ~ 450 mm||200mm ~ 550 mm|
Festo Pneumatics component;
|Omron PID Temperature Controller;|
|Delta Colorful Touch Sreen from Taiwan;||Piab Vacuum Generator|
Low Operating & Maintenance cost;
Safty Lock, CE Application
Servo Motor Drive to support the Heavy weight during the product is filled.
Interlock & Safety Relay;
Quick Release conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency inverter Speed control;
Pouches Auto feeder (Good for Standup Pouch Feeding)
* Auto Feed the pouch to the machine to run continuously;
* Center the pouch position before pick up;
KEEPACKAGING CO., LTD. has proven over time to be an outstanding supplier of high-quality mini doypack machine that is both consistent and predictable.2.
Keepac has the intellectually powerful technical force to produce the highest quality food packaging machine .3.
KEEPACKAGING CO., LTD. aims to quickly and efficiently drive the implementation of its innovation. Call!