Company Advantages1. Keepac simple packing machine must go through these following production stages, including metal materials procurement and preparation, components machining, surface polishing, and assembly. Less maintenance is required for this machine
2. Paying more attention to the quality of horizontal packaging machine will contribute to the brand image establishment of Keepac. It is highly reliable and provides consistent operation
3. The system performs a basic quality evaluation for this product at every production stage. It is air-, steam-, and water- resistant
4. Our quality experts test this product for high performance. This machine can be functioned in both manual and automatic modes
5. It is bestowed with the features like excellent quality and user-friendly performance. Its compact footprint helps make the most out of any floorplan
Fabrication Feature
◪ The machine runs straight flow design makes accessibility of parts.
◪ It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
◪ It takes a few minutes to do the Clean with only one person.
◪ Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
◪ The machine is full protector which is kept the operator being out of the moving component during the machine running.
| Bag Width: | Bag Length: | Tubular Material: |
| 110mm ≤ Width ≤ 210 mm; | 120mm ≤ Length ≤ 310 mm; | Tubular reel Roll; |
Electronic: | Mitsubishi PLC
|
Pneumatic: | Pneumatics component SMC; |
| Omron PID Temperature Controller; |
| Winview Colorful Panel from Taiwan; | Piab Vacuum Generator From Sweden; |
1
1
Low Operating & Maintenance cost;
1
1
InterLock, CE Certificate;
* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;
1.Safety Infeed hopper
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
2.Important Feature Grippers’ working Position
* The Linear Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Linear machine than normal pouch machine because Grippers’ holding position
Current Pouch Machine’s Grippers
* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;
Company Features1. Due to the development of a strict management system, Keepac has made great progress in the simple packing machine industry. KEEPACKAGING CO., LTD. has its own R&D laboratory for developing and producing horizontal packaging machine .
2. Our factory has a complete total quality management system. This system is laid down under the progressive and scientific management concept. We have proved that this system contributes a lot in improving productivity.
3. Our excellence comes from the efforts of our professional staff from such departments as R&D department, sales department, design department and production department. Sustainability engagement development is a vital part of our company operation. We engage development teams in designing more sustainable solutions across products’ life cycles, from formulation to manufacturing, to product use and end-of-life.
