Company Advantages1. The design of Keepac packaging machine design is the perfect combination of aesthetics and practicality. It features high precision, minimal maintenance, and trouble-free output
2. The product has a wide popularization value and will be more widely used in the future. All parts in contact with the product can be sterilized
3. The product has the advantage of stable mechanical properties. Having been treated under extremely cold temperatures, its mechanical components are tensile enough to withstand extreme industrial conditions. Less maintenance is required for this machine
4. This product has a strong load capacity. Its dimensions are calculated based on the intended loads and strength of the material. It will not easily breed mildew and mold
5. The product has good contact performance. All its parts have been professionally welded and soldered with advanced technique. It is highly reliable and provides consistent operation
Fabrication Feature
◪ The machine runs straight flow design makes accessibility of parts.
◪ It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
◪ It takes a few minutes to do the Clean with only one person.
◪ Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
◪ The machine is full protector which is kept the operator being out of the moving component during the machine running.
| Bag Width: | Bag Length: | Tubular Material: |
| 110mm ≤ Width ≤ 210 mm; | 120mm ≤ Length ≤ 310 mm; | Tubular reel Roll; |
Electronic: | Mitsubishi PLC
|
Pneumatic: | Pneumatics component SMC; |
| Omron PID Temperature Controller; |
| Winview Colorful Panel from Taiwan; | Piab Vacuum Generator From Sweden; |
1
1
Low Operating & Maintenance cost;
1
1
InterLock, CE Certificate;
* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;
1.Safety Infeed hopper
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
2.Important Feature Grippers’ working Position
* The Linear Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Linear machine than normal pouch machine because Grippers’ holding position
Current Pouch Machine’s Grippers
* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;
Company Features1. KEEPACKAGING CO., LTD. is an independent and reliable manufacturing firm. Based in China, we mainly manufacture and distribute mini packaging machine . Keepac applies the advanced technologies to produce packaging machine design .
2. KEEPACKAGING CO., LTD. knows profoundly concerning the industrial packing machine .
3. KEEPACKAGING CO., LTD. has a complete and scientific quality management system. We can provide an abundance of automatic tea packing machine with high quality. Please contact us!
