Keepac  > 

AI - Page Sitemap

 > 

Keepac duplex milk powder packing machine manufacturers for standup pouch

Keepac duplex milk powder packing machine manufacturers for standup pouch

Keepac duplex milk powder packing machine manufacturers for standup pouch

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch, zipper bag;
Max Speed
20 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac duplex milk powder packing machine manufacturers for standup pouch-1
Keepac duplex milk powder packing machine manufacturers for standup pouch-2
Keepac duplex milk powder packing machine manufacturers for standup pouch-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac duplex milk powder packing machine manufacturers for standup pouch-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac duplex milk powder packing machine manufacturers for standup pouch-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac duplex milk powder packing machine manufacturers for standup pouch-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac duplex milk powder packing machine manufacturers for standup pouch-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac duplex milk powder packing machine manufacturers for standup pouch-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac duplex milk powder packing machine manufacturers for standup pouch-9


4.Important Feature Grippers’ working Position

Keepac duplex milk powder packing machine manufacturers for standup pouch-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac duplex milk powder packing machine manufacturers for standup pouch-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac duplex milk powder packing machine manufacturers for standup pouch-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac duplex milk powder packing machine manufacturers for standup pouch-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac duplex milk powder packing machine manufacturers for standup pouch-14
Keepac duplex milk powder packing machine manufacturers for standup pouch-15
Keepac duplex milk powder packing machine manufacturers for standup pouch-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac duplex milk powder packing machine manufacturers for standup pouch-17
Keepac duplex milk powder packing machine manufacturers for standup pouch-18



The production standards of Keepac milk powder packing machine are the highest in the industry. It is mainly used for architectural or decorative applications
Keepac automatic form fill seal machines benefits from a higher level of attention of detail. It is resistant to heat, cold, moisture and corrosion
Every detail of Keepac automatic form fill seal machines reflects the exquisite craftsmanship. Its manufacturing and welding are precise and reliable
There are higher requirements in terms of materials used for milk powder packing machine.
The specifications of milk powder packing machine can be customized according to customer needs. This product meets the requirements of IS9001 Quality Management System
The product can run stably in rigorous conditions. The product is not affected by extreme weather conditions such as thunder lightning and heavy storm, nor high-temperature or humid condition. It is versatile and designed for multiple purposes in the installation
This is a simple and cheap way to change the appearance of the bedroom. It is available in a variety of colors to suit anyone's needs. It is versatile and designed for multiple purposes in the installation
It is not prone to burn out due to excessive temperatures. It is designed with a temperature protection system to prevents internal components. Its manufacturing and welding are precise and reliable
The product has remarkable hardness. It is made of metal materials which have excellent mechanical properties such as high hardness and strength. With fast assembly speed and silent mounting, it provides installation personnel with efficiency
The product consumes little energy. It transforms little physical or electrical energy into enormous mechanical energy during operation. This product is both lightweight and stable
KEEPACKAGING CO., LTD.'s customer service team is always available to answer your questions on milk powder packing machine. This product meets the requirements of IS9001 Quality Management System
Improving the quality of the service has been always a focus for the development of Keepac. It is available in a variety of sizes and shapes
KEEPACKAGING can meet the market demand with the highest efficiency. It is mainly used for architectural or decorative applications
We have strict inspection system to control quality when producing milk powder packing machine. Combined with engineered dimensions and a perfect welding procedure, it is durable for use
KEEPACKAGING CO., LTD. ensures positive customer service experience for its clients. It is mainly used for architectural or decorative applications
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...