Keepac  > 

AI - Page Sitemap

 > 

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch, zipper bag;
Max Speed
20 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-1
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-2
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-9


4.Important Feature Grippers’ working Position

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-14
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-15
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-17
Keepac duplex horizontal form fill seal machine manufacturers for zipper bag-18



The surface treatment of Keepac horizontal form fill seal machine consists of several stages, including rust, grease, and oxidization resistant treating processes. All these processes are carefully done to guarantee its resistant capacity. It is very durable and will not easily break
The quality control of Keepac horizontal form fill seal machine not only relies on manual inspection but also advanced technology such as computerized testing and hardness testers. It is waterproof and can protect the objects from being exposed to the liquids
Keepac sugar packing machine meets the newest national and hardware industries quality standards in regards to its production workmanship as well as specification requirements. Made of the highest quality materials, it is surprisingly strong for hanging objects
Every production stage of Keepac horizontal form fill seal machine is carried out by advanced automatic machines, including material cutting, stamping, welding, and surface polishing. It acts as a protector for preventing the objects from chipping
Keepac sugar packing machine will go through scrutinization under the dimension admeasuring apparatus and hardness testers which features high precision, so as to guarantee its accuracy. With excellent resistance to demagnification, it is perfect for both temporary or permanent use
The service life of this product is highly guaranteed by the strict test procedure which is in line with international standard. It is tested to be high performance and user-friendly. It has excellent temperature stability, allowing it has magnetic properties under extreme temperature conditions
The product undergoes strict QC procedures including process control, random inspection, and routine inspection. These inspections prove to be helpful to the quality of the product. The content of the epoxy inside the product conforms to the international standard, making it be 100% healthy for people
This product is not only reliable in quality, but also excellent in long-term performance. The product has passed the certification of SGS
The product has stable performance, long storage life and reliable quality. It is waterproof and can protect the objects from being exposed to the liquids
In order to comply with international quality standards, this product has passed strict quality inspection procedures. The product is ideal for creating a shock-absorbing effect
There are a variety of energy-efficient upgrades people can make, such as replacing the conventional alternative with this product. It will definitely promote to cut electricity costs. The product has a high resistance to oxidation
It is able to help pool owners to clean the swimming pools thoroughly and effectively regardless of the size, shape, or construction of the pool. It is waterproof and can protect the objects from being exposed to the liquids
The product is designed to be flexible, suiting the requirements of any space. It can be cut to the specific size and ensures that volumes are kept to a minimum. It has great durability and enjoys perfect friction performance
Customers agree that the product makes their life much easier, and it is hard to imagine their life without it. The product will not cause any scratches at all
Thanks to its high efficiency, the product only consume a little power energy. People said the operating cost of this product is lower than they expect. It has excellent temperature stability, allowing it has magnetic properties under extreme temperature conditions
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...