Keepac  > 

AI - Page Sitemap

 > 

Keepac duplex form fill seal machine Supply for zipper bag

Keepac duplex form fill seal machine Supply for zipper bag

Keepac duplex form fill seal machine Supply for zipper bag

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch, zipper bag;
Max Speed
20 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac duplex form fill seal machine Supply for zipper bag-1
Keepac duplex form fill seal machine Supply for zipper bag-2
Keepac duplex form fill seal machine Supply for zipper bag-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac duplex form fill seal machine Supply for zipper bag-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac duplex form fill seal machine Supply for zipper bag-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac duplex form fill seal machine Supply for zipper bag-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac duplex form fill seal machine Supply for zipper bag-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac duplex form fill seal machine Supply for zipper bag-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac duplex form fill seal machine Supply for zipper bag-9


4.Important Feature Grippers’ working Position

Keepac duplex form fill seal machine Supply for zipper bag-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac duplex form fill seal machine Supply for zipper bag-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac duplex form fill seal machine Supply for zipper bag-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac duplex form fill seal machine Supply for zipper bag-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac duplex form fill seal machine Supply for zipper bag-14
Keepac duplex form fill seal machine Supply for zipper bag-15
Keepac duplex form fill seal machine Supply for zipper bag-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac duplex form fill seal machine Supply for zipper bag-17
Keepac duplex form fill seal machine Supply for zipper bag-18



potato chips packing machine is better in its material than similar type of products. This product is resistant to strong chemicals such as petroleum, diesel, and pesticides
Concept of form fill seal machine provides valuable reference for improvement design and optimization of body framework structure of potato chips packing machine. This product is particularly effective in radiation
The main body of form fill seal machine is made by advanced potato chips packing machine. This product features complex internal features like spherical cavities and deep grooves
potato chips packing machine is designed as form fill seal machine and it provides form fill seal machine solution. All its materials are compliant with the RoHS standard
The series of form fill seal machine are form fill seal machine, will bring the best result of [拓展关键词特点] for you. It can be generally used under cyclic loading conditions
The product has guaranteed safety. The built-in safety systems, such as overheat protection, overload protection, and safety lock, ensure the safe operation. This product is a cost-efficient option, particularly in high-volume or long-term production runs
The product is not prone to yellowing. Its surface has been specially treated to enhance its contacting performance with oxygen in the air. All its materials are compliant with the RoHS standard
The product is free of electric leakage problems. Its circuit design has been optimized with an insulation protection system that would prevent any electrical risk. This product is extensively used in computers, telecom equipment, household appliances, automotive electronics, drones, robots, etc
The product features a remarkable energy-saving effect. It can effectively lower its energy consumption while adapting different working modes. It can be fabricated through a wide range of processes, including casting, deep drawing, welding, forging, soldering, and chipping
The product is prominent in energy saving. The energy-keeping technology adopted increases power and balances the voltage, which helps reduce power consumption. This product has the advantage of temperature resistance
The fabric that makes up this piece of bedding regulates users' body temperature and helping them get a good night's sleep. This product has a smooth and accurate surface
This product is a utility and deluxe bedding option. The soft breathable comfort it provides will make the investment worth of it. All its materials are compliant with the RoHS standard
From adding iconic beauty to improving a building’s performance, this product can add value for a wide range of projects. This product has a smooth and accurate surface
Many benefits can be attributed to the use of this product. For example, productivity is increased, safety is guaranteed, and the working time of labor is shortened. This product is made to sustain the toughest industrial applications
Users will have fewer problems with allergies ruining the rest at night because dust mites can’t easily adhere to its fabric which has a tight weave. Its surface treatments are selectable, such as polishing, plating, coating, etc
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...