Keepac  > 

AI - Page Sitemap

 > 

Keepac duplex form fill seal machine factory for zipper bag

Keepac duplex form fill seal machine factory for zipper bag

Keepac duplex form fill seal machine factory for zipper bag

Brand Name
Keepac
Place of Origin
China
Start Port
Foshan
OEM/ODM Availability
Yes
Delivery Time
65 Days
Bag shape
Standup Pouch, 3sides Sealed Pouch;
Max Speed
20 BPM with 1s Discharge Filling time;
Power
220V/50/60HZ Single Phase 5 Amps
Air
6Kg/cm2, 0.14CBM per min;
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, It is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine are full protector which is kept the operator being out of the moving component during the machine running.


Keepac duplex form fill seal machine factory for zipper bag-1
Keepac duplex form fill seal machine factory for zipper bag-2
Keepac duplex form fill seal machine factory for zipper bag-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac duplex form fill seal machine factory for zipper bag-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac duplex form fill seal machine factory for zipper bag-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac duplex form fill seal machine factory for zipper bag-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac duplex form fill seal machine factory for zipper bag-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac duplex form fill seal machine factory for zipper bag-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac duplex form fill seal machine factory for zipper bag-9


4.Important Feature Grippers’ working Position

Keepac duplex form fill seal machine factory for zipper bag-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac duplex form fill seal machine factory for zipper bag-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac duplex form fill seal machine factory for zipper bag-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac duplex form fill seal machine factory for zipper bag-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac duplex form fill seal machine factory for zipper bag-14
Keepac duplex form fill seal machine factory for zipper bag-15
Keepac duplex form fill seal machine factory for zipper bag-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac duplex form fill seal machine factory for zipper bag-17
Keepac duplex form fill seal machine factory for zipper bag-18
Zipper closing device
* Close Zipper After Filling, Before Sealing;
* The Filled bag is passed the Rolled Wheel to close the zipper;
Keepac duplex form fill seal machine factory for zipper bag-19
Keepac duplex form fill seal machine factory for zipper bag-20
Keepac duplex form fill seal machine factory for zipper bag-21

MiniWeigh Duplex 2H3L(2Heads with 3Liters Weighing bucket)


Filling Range: Up to 1.5Kg
Filling Head Quantity: 2Heads
Filling Speed Up to 20bags/min;
Accuracy:± 2g;
Hopper Volume: 3Liters
Power 220V, Single Phase 50HZ;
Operation Panel: 7 inch touch screen;
1, All parts that contact with filling products are made by SUS 304# and polishing dispose. Meet with G.M.P. Standard;
2, Each Weighing Head have Two Infeed Funnel, Bigger And Smaller. The Bigger infeed funnel is to send out the product with Big power;  The smaller infeed funnel has two feeding funnels to get the good weight.
3, The Miniweigh can do the cleanup by itself after daily production by the weighing hopper;
4, Germany HBM Load Cell



In the production of Keepac chocolate packing machine, the quality assurance team monitors every stage of manufacturing and packaging process to deliver the quality beauty makeup product. Made of well-selected fabrics, it doesn't tear easily
All the production steps of Keepac chocolate packing machine are strictly and perfectly done in accordance with the new cosmetic, pharmaceutical and dermatology trends in the beauty makeup industry. The product has good resistance to sunlight
Every Keepac chocolate packing machine is tested in-house for stability, compatibility, microorganism, and packaging testing to meet the regulations of the beauty makeup industry. It can get dried very quickly after washing
The quality of Keepac form fill seal machine is paramount. Our R&D team is always looking for new natural ingredients to guarantee the best quality product. Various sizes make it suitable for people of different sizes and shapes
To ensure the quality and safety of Keepac form fill seal machine, the production process is constantly observed to ensure each of its ingredients does no harm to the end users.
It has a suitable level of air permeability. Type of yarn, fabric structure, and fiber parameters all contribute to this property. It sells well in the markets of Australia, France, Brazil, and Japan
This product is extremely waterproof, highly puncture and abrasion resistant, and will stay flexible even in the coldest temperatures. Made of high-quality fabrics, it is skin-friendly and won't cause allergies to the skin
It comes with the assurance of the highest quality and superior electric performance. It always works stably and reliably even in rigorous conditions. The fabrics of the product provide women some protection from the sun
The product needs little effort. It is designed under the user-friendly concept which aims to finish the pool cleaning work with the least amount of labor. It can provide all-day comfort for women
It has improved thermal performance and condensation resistance. Thermal breaks are incorporated through low conductivity materials such as traditionally PVC, Neoprene rubber, and polyurethane. The high-waisted design highlights the hips of women
Keepac continuously deepens the upgrading of form fill seal machine to make it more unique and of better quality. It can get dried very quickly after washing
KEEPACKAGING CO., LTD. has proficiency in quality control systems. It is neatly and cleanly tailored, leaving no thread residue
We have strict inspection system to control quality when producing chocolate packing machine. It can get dried very quickly after washing
It's a very long time since KEEPACKAGING CO., LTD. has been focused on form fill seal machine. It features easy cleaning - both hand wash and machine wash in cold water are available
The assurance of form fill seal machine will contribute to the development of Keepac. A variety of colors is optional for customers
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...