Keepac  > 

AI - Page Sitemap

 > 

Keepac different sized small food packaging machine factory for pre-openned zipper pouch

Keepac different sized small food packaging machine factory for pre-openned zipper pouch

Keepac different sized small food packaging machine factory for pre-openned zipper pouch
  • Keepac different sized small food packaging machine factory for pre-openned zipper pouch
  • Keepac different sized small food packaging machine factory for pre-openned zipper pouch
  • Keepac different sized small food packaging machine factory for pre-openned zipper pouch
  • Keepac different sized small food packaging machine factory for pre-openned zipper pouch
  • Keepac different sized small food packaging machine factory for pre-openned zipper pouch
  • Keepac different sized small food packaging machine factory for pre-openned zipper pouch

Keepac different sized small food packaging machine factory for pre-openned zipper pouch

Mini Doypack Features
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Mini Doypack Features
BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation

 BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
 BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
 TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
 FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
 SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
 MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.



Working Range:


Standard: Stainless Steel 304 Frame


ModelBag WidthBag Length
MDP-S100mm ~ 300 mm100mm ~ 300 mm
MDP-L130mm ~ 300 mm130mm ~ 420 mm


Electronic:

Mitsubishi PLC;


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Application;


Mechanical:
Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;


Safety Feature


Keepac different sized small food packaging machine factory for pre-openned zipper pouch-1
Interlock & Safety Relay;
      Interlock;
Keepac different sized small food packaging machine factory for pre-openned zipper pouch-2
Omron Safety Relay;


Options


Pouch Auto Feeder
* Auto Feed the pouch to the machine to run continuously;
Keepac different sized small food packaging machine factory for pre-openned zipper pouch-3
Keepac different sized small food packaging machine factory for pre-openned zipper pouch-4
Hot Stamp Printer
* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm
Keepac different sized small food packaging machine factory for pre-openned zipper pouch-5

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;




Function and performance are the values built into every Keepac small food packaging machine. Using AI intelligent power distribution technology, it features low energy consumption
Keepac small food packaging machine is produced adopted advanced production technology. The unique split structure allows it easy to be transported and installed
Keepac doypack packaging machine is made of high-quality materials which are strictly selected by our experienced production team based on the application requirements and the industry quality standards. Its solar panel supports 360 degrees of rotation to adjust the direction
Keepac doypack packaging machine is fabricated using the sophisticated production technology in complete compliance with the industry standards. Equipped with the patent controller, it guarantees stable and reliable performance under rigorous condition
The raw materials of Keepac doypack packaging machine is extremely strict selection. The unique split structure allows it easy to be transported and installed
This product is breathable to some extent. It is able to regulate skin wettedness, which is directly related to the physiological comfort. The product has strong heat dissipation performance
The stable and reliable chemical and physical properties of this product are the outcomes of its internal structure which is uniquely formed. The strong and hard all-aluminum structure ensures its durability
The product has a smooth surface. It is furnished with a layer of glaze that can reduce the surface roughness. It enjoys great popularity in overseas markets such as the Middle East, Southeast Asia, Africa, South America, and Europe
The product has the advantage of energy efficiency. Its Energy Star certification indicates that this product meets strict standards of efficiency. Its battery can be made of lead-acid or LiFePO4 battery
The product is suitable for operating with the electricity supply system. It runs safely and efficiently with customized parameters for different places. Adopting nano-waterproof technology, it can be used outdoors
The product features high acoustic insulation. It comes with a very wide range of construction styles that minimize sound transition or absorb sound to minimize sound room reflection. Its solar panel supports 360 degrees of rotation to adjust the direction
With irresistible development trend, the product has been widely adopted in the industry. Powered by the sunlight, it needs zero electricity charges
KEEPACKAGING CO., LTD. has well experienced staff with remarkable qualifications. The product is independently developed with a patent
Its great contribution to the current field cannot be ignored. It achieves the most efficient use of resources combining time and intelligent control schemes
After years of development, KEEPACKAGING CO., LTD. has accumulated a large number of consumer groups, domestic and foreign brand resources. Its solar panel supports 360 degrees of rotation to adjust the direction
The combination of advanced production technology and superior material can fully guaranteed the quality of doypack packaging machine. The product has strong heat dissipation performance
This product far exceeds other products in terms of performance/price ratio. The product is independently developed with a patent
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...