Keepac  > 

AI - Page Sitemap

 > 

Keepac Custom horizontal form fill seal machine Supply for food

Keepac Custom horizontal form fill seal machine Supply for food

Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food
  • Keepac Custom horizontal form fill seal machine Supply for food

Keepac Custom horizontal form fill seal machine Supply for food

Fabrication Feature
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Fabrication Feature
The machine runs straight flow design makes accessibility of parts.
 It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas.
 It takes a few minutes to do the Clean with only one person.
 Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, Product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator.
 The machine is full protector which is kept the operator being out of the moving component during the machine running.


Keepac Custom horizontal form fill seal machine Supply for food-1
Keepac Custom horizontal form fill seal machine Supply for food-2
Keepac Custom horizontal form fill seal machine Supply for food-3


Working Range:


ModelBag WidthBag Length
Servo Mini Linear Machine 15090mm ~ 150 mm90mm ~ 210 mm
Servo Mini Linear Machine 210120mm ~ 210 mm150mm ~ 310 mm
Servo Mini Linear Machine 260120mm ~260 mm150mm ~ 350 mm


Electronic:

Mitsubishi PLC


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 10 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Certificate;


* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;


Product introduction


1.Safety Protection

Keepac Custom horizontal form fill seal machine Supply for food-4
Interlock

IP66 Application;
Easy Operation, No Key inserted;

Keepac Custom horizontal form fill seal machine Supply for food-5
Safety Relay

check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;

Keepac Custom horizontal form fill seal machine Supply for food-6
8inches Color Control Panel;

More friendly like Pad operation;
Easy View;

Keepac Custom horizontal form fill seal machine Supply for food-7
Easy Adjustable Pouch Magazine

Hand Wheel to adjust pouch magazine for different bag width;


2.Safety Infeed hopper

* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.

Keepac Custom horizontal form fill seal machine Supply for food-8


3.Transverse Moved Bars on Servo Mini

Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.

Keepac Custom horizontal form fill seal machine Supply for food-9


4.Important Feature Grippers’ working Position

Keepac Custom horizontal form fill seal machine Supply for food-10

Servo Mini’s Grippers


* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.

Keepac Custom horizontal form fill seal machine Supply for food-11

Current Pouch Machine’s Grippers


* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;


Options


Keepac Custom horizontal form fill seal machine Supply for food-12

Pouches Auto Feeder (Good for Standup Pouch, with/without zipper like the photo) That is the most important for the machine whatever its running speed is.


* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photoes, It is easy to find out the zipper and gusset bottom are bent up so much. So the pouches stack are bent as a "U" shape.
 If the machine was run the pouch directly without any pouches correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is ran out, the machine would be Switched automatically to pickup the bag from one magazine to another one;
It would be run in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pickup.

Keepac Custom horizontal form fill seal machine Supply for food-13
LShaped SS 304 Take Away Conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency invertor Speed control
Keepac Custom horizontal form fill seal machine Supply for food-14
Keepac Custom horizontal form fill seal machine Supply for food-15
Keepac Custom horizontal form fill seal machine Supply for food-16

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.


Zipper Opener (one More Station)
* Open the closed zipper before Filling, It needs the tip above the Zipper to be at least 30mm;
* It works for Closed Zipper Pouch; Minimum Bag Width 100mm;
Keepac Custom horizontal form fill seal machine Supply for food-17
Keepac Custom horizontal form fill seal machine Supply for food-18



The production process of Keepac horizontal form fill seal machine is constantly monitored by special personnel to ensure its smooth operation. So the pass rate of finished product can be ensured. Adopting PVC as one of the main materials, it has good stability and safety
Keepac automatic form fill seal machines is fabricated from optimum quality raw materials with superior strength and durability. The product has good insulation voltage resistance
Keepac horizontal form fill seal machine is manufactured at a quick rate due to the high efficiency of production equipment. The product has the characteristics of weather resistance
Keepac horizontal form fill seal machine designed by a group of experts, combines aesthetic look and practicality. Compared with other products in the market, it features better conductivity
Keepac horizontal form fill seal machine is fabricated using the sophisticated production technology in complete compliance with the industry standards. It can withstand the high temperature and low temperature as well
The principle of horizontal form fill seal machine of automatic form fill seal machines is proposed for KEEPACKAGING CO., LTD. to select materials. It is widely used in the fields of computers, instrumentation, home appliances, electronics, railways, and so on
It is concluded that horizontal form fill seal machine has got the features of automatic form fill seal machines. It conforms to the standards of America, Japan, Germany, etc
automatic form fill seal machines is applied to horizontal form fill seal machine for its advantages of horizontal form fill seal machine. It is an important accessory product used to realize the electrical connection
horizontal form fill seal machine firstly take satisfying consumers' demand as aim.
The design of horizontal form fill seal machine will surely accommodate your unique temperament and taste. It has passed the tests performed by the National Electrical Control and Distribution Equipment Quality Supervision Testing Center
horizontal form fill seal machine has virtues such as automatic form fill seal machines, high stability, long life and low cost, which provide probability for abroad application of it. Its surface has no burr at all
The product is winning greater market share and can be suitable for wider application in the future. Having passed over a 48-hour salt spray test, it is 100% corrosion resistant
This product is becoming a must for the domestic and international market. The product has good insulation voltage resistance
The product can meet the ever-changing needs overwhelmingly. Adopting PVC as one of the main materials, it has good stability and safety
With excellent engineering technology and high-quality automatic form fill seal machines, KEEPACKAGING CO., LTD. has won unanimous recognition from customers. It has passed the certification of CE
After years of operation, KEEPACKAGING CO., LTD. has established a complete product system. The product won't rust even after being used for a long time
KEEPACKAGING CO., LTD. focuses on building relationships and providing the best customer service possible. It can be white, blue, yellow, red, green, etc. based on needs
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...