Company Advantages1. Advantages such as snack packaging machine have helped snack food packaging machine win the market.
2. The strict quality control system is adopted to provide a strong guarantee for the quality of the product.
3. During the testing phase, its quality has been paid great attention by the QC team.
4. KEEPACKAGING CO., LTD. has a strong sense of responsibility and professionalism.
5. Keepac has been putting emphasis on the quality of service.
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
◪ FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
◪ SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
| Model | Bag Width | Bag Length |
| MDP-S | 100mm ~ 300 mm | 100mm ~ 300 mm |
Electronic: | Mitsubishi PLC; |
Pneumatic: |
Pneumatics component Airtac from Taiwan; |
| Omron PID Temperature Controller; |
| Delta 7 inches from Taiwan; | Piab Vacuum Generator From Sweden; |
1
1
Low Operating & Maintenance cost;
1
1
InterLock, CE Application;
Interlock & Safety Relay;
Interlock;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
Company Features1. Keepac has vigorously explored the best snack packaging machine which makes it a trustworthy provider in snack food packaging machine industry.
2. Through proficiently experienced technology, grain packing machine is made to be of excellent quality.
3. Since the inception till now, we have been adhering to the principle of integrity. We always conduct business trade in accordance with fair and refuse any vicious business competition. We pride ourselves on our commitment to operating ethically — we hold ourselves accountable for the impact we make and the influence for good we can have everywhere we do business.
