Every Keepac mini doypack machine is tested in-house for stability, compatibility, microorganism, and packaging testing to meet the regulations of the beauty makeup industry. 2.
The product has been tested to exacting quality standards. 3.
The product is up to standard in quality and performance. 4.
KEEPACKAGING CO., LTD. is able to learn more about customers' problem from multiple perspectives. 5.
KEEPACKAGING CO., LTD. can also introduce the production methods of all types of mini doypack machine for free.
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|Duplex 200||100mm ~ 200 mm||100mm ~ 300 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Application;
Interlock & Safety Relay;
The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch
is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and
And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
As a leading mini doypack machine manufacturer in China, KEEPACKAGING CO., LTD. highly value quality. 2.
Technical personnel in Keepac guarantee the quality of automatic grain packing machine . 3.
We regard environmental protection as our first priority. We put into practice by cooperating with related companies, business partners, and employees. From the day of establishment, we adhere to the principle of "clients count most". We define ourselves as a company existing to help clients sell more in their markets, and we will tail targeted services for them. Looking into the future, our company will constantly work to develop innovative solutions that bring new trends to the market.