Company Advantages1. Keepac product packaging machine is of eye-catching design. Our Structural and Graphic Design Team work with customers during the product development stage to create high impact displays for retail and club settings. It is widely used in food fields
2. Our customers say the product is not subject to deformation or breaking even if they put much physical pressure on it. Less maintenance is required for this machine
3. The product features the desired operation safety. During its operation, it is not prone to electrical hazards such as short circuit and current leakage. Savings, security, and productivity will be increased with this machine
4. It has good strength. Its materials have the required toughness to resist deformation under stress and resist fracture due to high impact load. It keeps new after years of use thanks to the coating process
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
◪ FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
◪ SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
Model | Bag Width | Bag Length |
MDP-S | 100mm ~ 300 mm | 100mm ~ 300 mm |
Electronic: | Mitsubishi PLC; |
Pneumatic: |
Pneumatics component Airtac from Taiwan; |
Omron PID Temperature Controller; |
Delta 7 inches from Taiwan; | Piab Vacuum Generator From Sweden; |
1
1
Low Operating & Maintenance cost;
1
1
InterLock, CE Application;
Interlock & Safety Relay;
Interlock;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
Company Features1. In order to cater to the rapid changes in society, Keepac has always focused on technological innovation.
2. Every day, we focus on sustainability practices. From production to customer partnerships, to supporting local charities and employee engagement, we implement sustainability strategies along the entire value chain.