Model | Bag Width | Bag Length | |
MDP-S | 120mm ~ 260 mm | 120mm ~ 300 mm | |
Electronic: | Mitsubishi PLC | Pneumatic: | Pneumatics component Airtac from Taiwan; |
Omron PID Temperature Controller; | |||
Delta 10 inches from Taiwan; | Piab Vacuum Generator From Sweden; |
* Panasonic Servo Motor Drive And Screw Shaft track to do the transverse Moving;
1.Safety Protection
IP66 Application;
Easy Operation, No Key inserted;
check and monitor a safety system;
either allow the machine to start or execute commands to stop the machine;
More friendly like Pad operation;
Easy View;
Hand Wheel to adjust pouch magazine for different bag width;
2.Safety Infeed hopper
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
3.Transverse Moved Bars on Servo Mini
Please check the photo about the transverse Moving bars which would be moved the filled bag to the sealing station. It would be dipped the U shaped to catch the straight up filled pouch to be moved. This bar is helpful for different application like powder, Liquid.
4.Important Feature Grippers’ working Position
Servo Mini’s Grippers
* The Servo Mini Machine is catch the area which is above the zipper. It would be filled more up to zipper area. Its filling area is about 10 + 25mm=35mm. Like the picture.
Especial for the powder application, when the filled bag is straight up after filling, it is easy to push out the powder to build the dusty.
The dusty would be polluted the pouch sealed area. The sealing quality would be leakage or broken.
So The product would be filled more by Servo Mini machine than normal pouch machine because Grippers’ holding position.
Current Pouch Machine’s Grippers
* The normal pouch machine is held the position as the photo.
A is Height of the gripper. Its minimum Height is 10mm.
B is Height of the zipper opener and sealing area. Its Minimum height is 25mm;
When the bag is filled, the product level should be at least 25mm lower than the gripper position B. Or else, when the bag is straight up by the grippers, the product would be squeezed out. So It means there is about 10 + 25 + 25=60mm could not be filled for the pouch;
Convexity Product Settle
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.
Descriptions:
1. The new design, beautiful appearance, the structure is more reasonable, more advanced technology.
2. Imported PLC computer control system, color touch screen, easy to operate, intuitive and efficient.
3. The imported servo film transport system, imported color code sensor, accurate positioning and the machine performance is remarkable, the packing is beautiful.
4. A varity of automatic alarming protective function, maximun limit to reduce wear and tear.
5. Pocket diversification, can provide customers with pillow bags, Angle of bags, handing hole bag, bag, etc.
6. Automatic feeding, metering, bag filing, date printing and product output of all processes.
7. High measuring accuracy, high efficiency, no broken material.
Application :
Laundry detergent ,water ,juice ,sauces ,etc
Type | TCLB-420P |
Film Width | Max.420mm |
Bag length |
80-300mm
|
Bag width | 60-200mm |
Product height | 10-60mm |
Film roll diameter | 0.04-0.08mm |
Packing speed | 5-60 bags/min |
Filling range | 150-1500ml |
Power | 220V, 50/60Hz, 2.2KVA |
Machine size | (L)1217×(W)1015×(H)1346 |
Packing:
There are two wooden case for the machine :
Wooden case 1 GW:380kg / NW:350kg /measurements(mm): 1320*800*1520 Volume(CBM):1.605
Wooden case 2 GW:90kg /NW:70kg / measurements(mm):2560*540*350 Volume(CBM):0.483
Total GW:450kg/NW:400kg Volume:2.088 CBM
Shipping:
Upon receipt of payment , delivery date will be in 3-15days, By Air, by Sea or by Express (DHL etc)Shipment cost will depend on the destination, shipment way,size and the weight of the goods.
Copyright © 2019 KEEPACKAGING CO., LTD.| All Rights Reserved Design