Keepac buy packing machine will go through a series of automatic tests. They include a polarity test, earth continuity test, insulation resistance test, and current leakage test. This machine can be functioned in both manual and automatic modes2.
The product has high practical value and commercial value and is now widely used in the market. All parts in contact with the product can be sterilized3.
The product has the advantage of stable mechanical properties. Having been treated under extremely cold temperatures, its mechanical components are tensile enough to withstand extreme industrial conditions. It will not easily breed mildew and mold4.
This product has the required safety. Different requirements regarding architecture and risk classification of this product have been considered carefully in the manufacture. It is highly reliable and provides consistent operation5.
It has good strength. The whole unit and its components have the proper sizes which are determined by the stresses so that failure or deformation does not occur. It has a smooth structure that is easy to clean and has no hidden cracks
◪ The machine runs straight flow design makes accessibility of parts;
◪ It allows the operator to see the entire filling process from the front of the machine during the running. Meantime, it is easy to clean and simply open the front clear transparent doors of the machine and access all bag filling areas;
◪ It takes a few minutes to do the Clean with only one person;
◪ Another feature is all the mechanics are located the back of the machine and the bag filling assembly is in the front. So, product will be never touched heavy duty, mechanics as they are separated. The most important is the safety protection for the operator;
The machine is full protector which is kept the operator being out of the moving component during the machine running;
|Model||Bag Width||Bag Length|
|Linear Doypack Machine 210||120mm ~ 210 mm||140mm ~ 280 mm|
|Linear Doypack Machine 260||150mm ~260 mm||150mm ~ 350 mm|
|Pneumatics component SMC;|
|Omron PID Temperature Controller;|
|Winview 10 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
|SEW Motor Drive;|
Low Operating & Maintenance cost;
InterLock, CE/UL Certificate;
* Good for Standup Pouch, with/without zipper like the photo
* That is the most important for the machine whatever its running speed is.
* When the standup pouch are stacked together, They would be bent up to effected the pouch position. From the photos, It is easy to find out the zipper and gusset bottom are bent up so much. So, the pouches stack are bent as a "U" shape.
If the machine was run the pouch directly without any pouch’s correction settlement, it is easy for the pouch to be out of running position.
This pouches feeder could be settled this issue;
* Auto Feed the pouch to the machine to run continuously;
* There are two pouch magazines. When pouch magazine is running out, the machine would be Switched automatically to pick up the bag from one magazine to another one;
It would be run-in turn. It is helpful for the operator to reload the bags;
* Easy Adjustable pouch magazine;
* It is fine for the pouch magazine to be taken maximum 90pcs pouch on each pouch magazine. It means two sets magazine could be put about 180pcs.
When the pouch is taken down on the conveyor, the conveyor would be settled the U shape issue. And it would be moved to be correct its position for machine to pick up.
2.Gas Flush Opening; Opens the bag completely
There are two photo sensors are two sides
of the top holder, Front and backward.
When both sensors are taken the bag together, it means the bag is opened. The machine would be flushed the gas into the bag to open the bag completely.
If one of two sensors could not be taken the bag, it means the bag is not opened. The machine would not do the filling even if the infeed hopper or filling nozzle is coming down. But no filling;
3.Horizontal 304 Take Away Conveyor with Quick Release Fabrication;
* Part A is Fixed.
* Part B is inserted up and down into the bag to guide to discharge product.
5.Convexity Product Settle
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling is center on middle of the pouch.
So, the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, the product would be spread around inside of the pouch.
Our main focus is to produce the best automatic tea packing machine in the market. Our manufacturing capabilities have continued to grow in recent years. This can be seen from the increasing customer number in our customer base. We have established business with several new customers this year.2.
At present, we have remarkably increased foreign market share. We have grasped and utilized every market opportunities to snap up inferior competitors in a legal way, which helps us enlarge the customer base.3.
We have brought up a production management team. The team mainly focuses on quality improvement. They have strict requirements on materials procurement and workmanship, which helps us gain an advantage over the competition by improving quality and cutting costs. We not only take part in the charitable giving but also we devote ourselves to volunteering in the communities, so as to make our society better. Get info!