Keepac snack packaging machine adopts the most popular production techniques. 2.
The product can be used for a long time. Its mechanical components are sturdy enough to wear over time and require little maintenance within its service life. 3.
This machine has the desired motion. Various possible mechanisms are shortlisted and analyzed during the design phase, and the best mechanism is selected for its design. 4.
I's ok that sample first for testing before you place order for snack food packaging machine .
Mini Doypack Features
◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.
Standard: Stainless Steel 304 Frame
|Model||Bag Width||Bag Length|
|MDP-S||100mm ~ 300 mm||100mm ~ 300 mm|
|MDP-L||130mm ~ 300 mm||130mm ~ 420 mm|
Pneumatics component Airtac from Taiwan;
|Omron PID Temperature Controller;|
|Delta 7 inches from Taiwan;||Piab Vacuum Generator From Sweden;|
Low Operating & Maintenance cost;
InterLock, CE Application;
Interlock & Safety Relay;
* It would be moved up and down to flap Pouch Bottom to settle and tight the product.
It is better than the flat plate.
* The product settle should be worked during the filling. Most of
the filling are center on middle of the pouch.
So the product would be built the ‘little mountain’.
It is better to have the convexity product as the pictures show.
When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter
When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;
With years of experience, KEEPACKAGING CO., LTD. has been a dependable role in designing and manufacturing high-quality snack packaging machine . 2.
Our snack food packaging machine production equipment possesses many innovative features created and designed by us. 3.
KEEPACKAGING CO., LTD. render that candy packaging machine is the best way to guarantee its prosperity and development. Check now! With the idea of constant pursuit of excellence, KEEPACKAGING CO., LTD. is deeply trusted by customers from home and abroad. Check now!